What is the average metal machining setter salary in West Midlands?
The average metal machining setter salary in West Midlands is £33,427 per year as of 2026/27. This is the median figure, so half of all workers in this role earn more and half earn less. That is 7.3% below the UK median of £36,048.
Official occupation: Metal machining setters and setter-operators
Full-time average annual pay in West Midlands
£33,427
Based on ~9,000 employees · 2026 · moderate suppression
Median
£33,427
Mean
£34,057
| Statistic | Annual pay (gross) |
|---|---|
| Median | £33,427 |
| Mean | £34,057 |
Region-level range withheld by ONS — UK-wide, the middle half of metal machining setter earnings fall between £30,167–£43,123. See full methodology →
Skilled Worker visa minimum
£34,600
Understanding Metal machining setter pay in West Midlands
The typical metal machining setter in West Midlands earns a median salary of £33,427 in 2026/27, based on around 9,000 employees — 7.3% (£2,621) below the UK-wide median of £36,048. These figures come from the ONS Annual Survey of Hours and Earnings (ASHE), so they reflect actual reported pay rather than self-reported estimates or job-advert ranges.
Across the UK, West Midlands ranks 8th of 11 regions for metal machining setter pay. Regional medians run from £28,496 in Wales up to £40,332 in South East, a spread of £11,836 (42%).
The mean (average) salary is £34,057, close to the median — the two measures broadly agree for metal machining setter in West Midlands, and the median remains the clearest guide to typical pay.
To see what £33,427 means after income tax and National Insurance, use the take-home pay calculator below — it also factors in student loan repayments.
Take-home pay estimate
Tax year 2025/26| Monthly | Annual | |
|---|---|---|
| Gross salary | £2,786 | £33,427 |
| Income tax | £348 | £4,171 |
| National Insurance | £139 | £1,669 |
| Take-home pay | £2,299 | £27,587 |
Estimate only · 2025/26 HMRC rates · Standard tax code · No pension contribution · Not financial or tax advice
How metal machining setter pay varies by region
South East is the highest-paying region for metal machining setter at £40,332 — 12% above the UK median. Wales is lowest at £28,496.
UK median £36,048
| Region | Median payUK median £36,048 | Median | Mean | vs UK median |
|---|---|---|---|---|
| South East | £40,332 | £40,332 | £42,519 | +12% |
| South West | £39,252 | £39,252 | £39,973 | +9% |
| Yorkshire and the Humber | £37,090 | £37,090 | £38,313 | +3% |
| East Midlands | £36,436 | £36,436 | £38,296 | +1% |
| Scotland | £36,394 | £36,394 | £40,156 | +1% |
| East of England | £35,960 | £35,960 | £39,015 | ±0% |
| North East | £33,847 | £33,847 | £37,158 | -6% |
| West Midlands (current region) | £33,427 | £33,427 | £34,057 | -7% |
| London | £33,123 | £33,123 | £37,028 | -8% |
| North West | £31,668 | £31,668 | £34,723 | -12% |
| Wales | £28,496 | £28,496 | £30,724 | -21% |
| Region | Median | vs UK |
|---|---|---|
| South East £40,332 | £40,332Mean £42,519 | +12% |
| South West £39,252 | £39,252Mean £39,973 | +9% |
| Yorkshire and the Humber £37,090 | £37,090Mean £38,313 | +3% |
| East Midlands £36,436 | £36,436Mean £38,296 | +1% |
| Scotland £36,394 | £36,394Mean £40,156 | +1% |
| East of England £35,960 | £35,960Mean £39,015 | ±0% |
| North East £33,847 | £33,847Mean £37,158 | -6% |
| West Midlands (current region) £33,427 | £33,427Mean £34,057 | -7% |
| London £33,123 | £33,123Mean £37,028 | -8% |
| North West £31,668 | £31,668Mean £34,723 | -12% |
| Wales £28,496 | £28,496Mean £30,724 | -21% |
Sorted highest median to lowest. The vertical line marks the UK median (£36,048); ‘Vs UK median’ compares each region’s median to it. Suppressed values mean ONS withheld this figure because the sample was too small to publish.
How metal machining setter pay in West Midlands has changed over time
Median annual pay for metal machining setter in West Midlands by year, shown against the UK-wide median (Source: ONS ASHE). The shaded band is the UK-wide 25%–75% pay range — ONS does not publish pay range breakdowns at region level.
West Midlands median
UK median
▪ UK-wide 25%–75% range
Pre-2021 figures mapped from SOC 2010 via ONS concordance table
Frequently asked questions
- How much does a metal machining setter earn in West Midlands?
- The median annual metal machining setter salary in West Midlands is £33,427, according to ONS ASHE 2026 data.
- How does metal machining setter pay in West Midlands compare to the UK average?
- West Midlands metal machining setters earn a median of £33,427 per year — 7.3% below the UK median of £36,048 (ONS ASHE 2026).
- Which area of the UK pays metal machining setters the most?
- South East has the highest median metal machining setter salary at £40,332 per year (ONS ASHE 2026).
- Is West Midlands a well-paid location for metal machining setters?
- The West Midlands median of £33,427 is 7.3% lower than the UK-wide median of £36,048, making it a below-average location for this role (ONS ASHE 2026).
How the figures are sourced
Data sources: Official UK earnings data (2026 provisional)(opens in new tab)
Related roles in Metal Machining, Fitting and Instrument Making Trades
Other published roles in this occupation group. View category overview →